Advertisement
1
Replacing the cleansing brush attachment
Ordering accessories
Note: Hold the shaving head holder in your hand
when you reinsert the shaving heads and reattach
the retaining rings. Do not place the shaving head
holder on a surface when you do this, as this may
cause damage.
7 Attach the shaving head holder to the bottom
part of the shaving unit ('click').
8 To reset the replacement reminder, press and
hold the on/off button for approx. 7 seconds.
The brush head should be replaced every
3 months or earlier if the brush hairs are deformed
or damaged (see 'Replacing the cleansing brush
attachment').
To buy accessories or spare parts,
visit www.shop.philips.com/service or go to your
Philips dealer. You can also contact the Philips
Consumer Care Centre in your country (see the
worldwide guarantee leaflet for contact details).
The following accessories and spare parts are available:
-
SH70 Philips shaving heads
-
HQ110 Philips shaving head cleaning spray
-
RQ111 Philips beard styler attachment
-
RQ585 Philips cleansing brush attachment
-
MS591 Philips cleansing brush head (sensitive)
-
RQ560/RQ563 Philips cleansing brush heads
(normal)
-
JC302/JC305 cleaning cartridge
-
HQ8505 supply unit
Note: The availability of the accessories may differ
by country.
29
English
Advertisement
