Sony DSC-RX10M2 How To Use Manual page 87

Help Guide
control wheel. You can move the tracking start area to a desired point by designating the
area to be the flexible spot or expand flexible spot.
Note
When the mode dial is set to
[Lock-on AF] for [Focus Area].
When the mode dial is set to
Area] is automatically switched to [Wide].
You can select [Lock-on AF] only when the focus mode is set to [Continuous AF].
A dotted square may appear around the whole screen in the clear image zoom, digital
zoom, or smart zoom range in order to focus using the entire frame.
[65] How to Use
Center Lock-on AF
When you press the center button, the camera detects the subject positioned in the center of
the screen and continues to track the subject.
1. MENU →
2. Align the target frame (A) over the subject and press
wheel.
Press
If the camera loses track of the subject, it can detect when the subject reappears on
the monitor and resume tracking.
3. Press the shutter button fully down to shoot the image.
Note
file:///Z|/15-1h_HG/Kaihan_20151021_FV-ZV/Nouhin/Web/4574925122.w/en/print.html[10/27/2015 6:18:47 PM]
(Movie) or when shooting movies, you cannot select
(Movie) and [Auto Dual Rec] is set to On, the [Focus
Using shooting functions
(Camera Settings) → [Center Lock-on AF] → [On].
again to stop tracking.
Adjusting the focus
in the center of the control