Sony DSC-RX10M2 How To Use Manual page 245

Hide thumbs Also See for DSC-RX10M2:
Table of Contents

Advertisement

Help Guide
The product is attempting to increase the visibility of the screen by temporarily brightening
the monitor under conditions of low illumination. There is no effect on the recorded image.
[295] Troubleshooting
Dark shadow appears on the image.
Depending on the brightness of the subject, you may see a dark shadow when you
change the aperture. This is not a malfunction.
[296] Troubleshooting
The eyes of the subject come out red.
Set [Red Eye Reduction] to [On].
Shoot the subject at a distance closer than the flash range using the flash.
Light the room and shoot the subject.
[297] Troubleshooting
Dots appear and remain on the screen.
This is not a malfunction. These dots are not recorded.
[298] Troubleshooting
You cannot shoot images continuously.
The memory card is full. Delete unnecessary images.
The battery level is low. Insert a charged battery pack.
file:///Z|/15-1h_HG/Kaihan_20151021_FV-ZV/Nouhin/Web/4574925122.w/en/print.html[10/27/2015 6:18:47 PM]
Troubleshooting
Shooting still images/movies
Troubleshooting
Shooting still images/movies
Troubleshooting
Shooting still images/movies
Troubleshooting
Shooting still images/movies

Advertisement

Table of Contents
loading

Table of Contents