Changing System Settings - Panasonic SC-VKX95 Operating Instructions Manual

Changing system settings

1
Press [DVD/CD].
2
Press [SETUP] to show the SETUP menu.
3
Press [R, T ] to select the menu and then press
[OK].
To go back to the previous menu, press
[ , RETURN].
4
Press [R, T ] to select an item and then press
[OK].
5
Press [R, T ] to make the setting and then press
[OK].
6
Press [SETUP] to close the screen.
• The settings stay intact even if you put the system on
standby mode.
• Underlined items are the factory settings in the menu.
EASY SETUP allows successive settings of the
items in the shaded area.
"DISC" menu
AUDIO
Change the audio language.
ENGLISH FRENCH
RUSSIAN ORIGINAL
SUBTITLE
Change the subtitle language.
AUTO 3 ENGLISH
SPANISH RUSSIAN
MENUS
Change the language for disc menus.
ENGLISH FRENCH
RUSSIAN OTHER ----
RATINGS
Set a ratings level to limit DVD-Video playback.
Setting ratings
0 LOCK ALL: To prevent playback of discs without
ratings levels.
1 to 7: To prevent playback of DVD-Video with the
same ratings recorded on them.
8 NO LIMIT
When you set the ratings level, a password screen is
shown.
Follow the on-screen instructions.
Do not forget your password.
A message screen is shown if a DVD-Video with higher
ratings level is played.
Follow the on-screen instructions.
SPANISH
1 2
OTHER ----
FRENCH
2
OTHER ----
SPANISH
2
PASSWORD
Change the password for "RATINGS" ( Z left).
1. Select "CHANGE" and then press [OK].
2. Input the current password with the numeric
buttons and then press [OK].
3. Input the new password with the numeric buttons
and then press [OK].
If "VERIFY" is shown, make sure that the new
password is correct and input it again.
1
The original language designated on the disc is
selected.
2 Input the applicable code from the "Language code
list" ( Z 26).
3
If the language selection for "AUDIO" is not available
for the disc played, the subtitles in that language will
be shown (if available on the disc).
"VIDEO" menu
TV ASPECT
Change the setting to suit your TV and preference.
16:9: Widescreen TV (16:9)
4:3PAN&SCAN: Regular aspect TV (4:3)
The sides of the widescreen picture
are cut off so it fills the screen (unless
prohibited by the disc).
4:3LETTERBOX: Regular aspect TV (4:3)
Widescreen picture is shown in the
letterbox style.
TIME DELAY
When connected with an AV amplifier and Plasma TV,
adjust if the audio is out of sync with the video.
0 ms 20 ms
60 ms 80 ms
NTSC DISC OUT
Change PAL 60 or NTSC output when you play NTSC
discs.
NTSC: Output signals from NTSC discs remains as
NTSC.
PAL60: NTSC discs can be viewed on PAL TV.
For the Middle East and South Africa
"PAL60" is the factory preset.
STILL MODE
Specify the type of picture shown when in pause
mode.
AUTO
FIELD: The picture is not blurred, but the picture
quality is lowered.
FRAME: Overall quality is high, but the picture is
blurred.
40 ms
100 ms
23