Radio - Panasonic SC-VKX95 Operating Instructions Manual

█ Menu 4 (HDMI)
HDMI STATUS
HDMI
To show HDMI information
Example:
CONNECTED STATE
A
AUDIO STREAM
2
MAX CHANNEL
3
VIDEO FORMAT
4
5 COLOUR SPACE
A
Connection status
B
Shows the output signal type.
(When "OFF" is selected in "AUDIO OUT"
( Z 24, "HDMI" menu), "---" will be shown.)
C
Shows the number of audio channels.
D
( Z below, "VIDEO FORMAT")
E
( Z below, "COLOUR SPACE")
HD ENHANCER
This works when the HDMI connection is being used
with "VIDEO PRIORITY" ( Z 24, "HDMI" menu) set to
"ON".
To sharpen the "720p", "1080i" and "1080p" picture
quality
OFF, 1 (weakest) to 3 (strongest)
VIDEO FORMAT
This works when the HDMI connection is being used
with "VIDEO PRIORITY" ( Z 24, "HDMI" menu) set to
"ON".
To select suitable picture quality with your TV
(Video recordings will be converted to, and output as,
high-definition video.)

480p/576p/720p/1080p (progressive)
 
480i/576i/1080i (interlaced)

The numbers shown depend on the disc being
played. One of the above numbers is shown.
• If the picture is distorted, press [CANCEL DEL] until
the picture is shown correctly. (The output will return to
"480p"/"576p".)
COLOUR SPACE
This works when the HDMI connection is being used
with "VIDEO PRIORITY" ( Z 24, "HDMI" menu) set to
"ON".
To select suitable picture colour with your TV
YCbCr 4:2:2
YCbCr 4:4:4
RGB
• An " " mark will appear if compatible with your TV.
*
• If the picture colour is distorted, press [CANCEL DEL]
until the picture colour is shown correctly.
16
HDMI INFORMATION
CONNECTED
PCM
2ch
720p
YCbCr 4:4:4

Radio

Preparation
Press [RADIO/AUX] to select "FM" or "AM".
Manual tuning
Press [3] or [5] to tune in to the station.
To tune automatically, press and hold the button until the
frequency starts changing quickly.
" " is shown when a stereo broadcast is being received.
Using the main unit
1
Press [TUNE MODE] to select "MANUAL".
2
Press [ 2 / 3 ] or [ 5 / 6 ] to tune in to the
station.
Improving the sound quality
When "FM" is selected
1
Press [PLAY MODE] to select "FM MODE".
2
Press [ Y , U ] to select "MONO" and then press
[OK].
To cancel, select "STEREO".
"MONO" is also cancelled when you change the
frequency.
When "AM" is selected
1
Press [PLAY MODE] to select "B.PROOF".
2
Press [ Y , U ] to select from "BP1" to "BP4" that
provides the best reception and then press [OK].
Memory presetting
You can preset up to 30 FM and 15 AM stations.
█ Automatic presetting
1
Press [PLAY MODE] repeatedly to select
"A.PRESET".
2
Press [ Y , U ] to select "LOWEST" or "CURRENT".
LOWEST Tuning begins from the lowest
frequency.
CURRENT Tuning begins from the current
frequency.
3
Press [OK] to start presetting.
The tuner presets all the stations it can receive into
the channels in ascending order.
To cancel, press [8].