4-66 Configuring Your Server
Define the virtual drive (VD) in DG that has been created in previous step. When DG was defined,
[VD Definition] screen is displayed. In the "Next LD, Possible RAID Levels" column, available
RAID levels and maximum size for VD are displayed.
As an example, define a RAID1 VD of 67.656GB.
1.
Specify the necessary parameters in left columns.
2.
Enter "67.656" in "Select Size" field, and select "GB" as a unit.
3.
Click [Accept] at the lower center of the screen.
4.
If you want to define another VD, click [Back] and repeat steps starting from Span
Definition screen.
IMPORTANT:
maximum size allowed for RAID1 (two hard disk drives). You need to
specify the maximum size for any other RAID levels according to
"Next LD, Possible RAID Levels".
The value shown in "Select Size" indicates the