D-Link AC1200 User Manual page 158

DIR-842V2 AC1200 Wi-Fi Gigabit Router
User Manual
You can specify the following parameters:
Parameter
Enable
Name
IP version
Dynamic IPsec
Type
Remote host
Remote identifier
16 0-9, A-Z, a-z, space, !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~.
Move the switch to the right to enable the tunnel.
Move the switch to the left to disable the tunnel.
General Settings
A name for the tunnel for easier identification. Use digits, Latin letters
(uppercase and/or lowercase), and other characters available in the US
keyboard layout.
16
An IP version.
Move the switch to the right to allow a remote host with any public IP
address to connect to the router via IPsec protocol. Such a setting can
be specified for one IPsec tunnel only. Connection requests via this
tunnel can be sent by a remote host only.
Select an identification method for the remote host (router) from the
drop-down list:
Address: The remote host is identified by its IP address.
•
• FQDN: The remote host is identified by its domain name.
The drop-down list is displayed if the Dynamic IPsec switch is
moved to the left.
Enter the remote subnet VPN gateway IP address if the Address
value is selected from the Type drop-down list.
Enter the remote subnet VPN gateway domain name if the FQDN
value is selected from the Type drop-down list.
The field is available for editing if the Dynamic IPsec switch is
moved to the left.
A remote host identifier
with particular hosts only. To establish connection, DIR-842V2
remote identifier
identifier value specified in the settings of the remote host. Use an IP
address, domain name, or certificate CN. Optional.
Page 158
Configuring via Web-based Interface
Description
to establish
value should correspond
connection over IPsec
to the local