Operating The Sensor Controls - Miele 11 892 110 Operating Instructions Manual

Operating the tumble dryer
h Start/Add laundry sensor control
Touching the Start/Add laun-
dry sensor control starts a pro-
gramme. The current programme
can be interrupted to add laundry.
The programme can be started when
the sensor control is flashing on and
off. The sensor control lights up con-
stantly once the programme has
started.
i PerfectDry indicator
The PerfectDry indicator flashes
after the programme has started and
switches off when the programme
running time is displayed. The Per-
fectDry system measures the resid-
ual moisture of the laundry. In pro-
grammes with selectable drying
levels, PerfectDry dries the laundry
precisely, although the result is also
influenced by the calcium content of
the water.
The PerfectDry indicator lights up to-
wards the end of the programme
once the selected drying level has
been reached.
Nothing is indicated for programmes
that do not have a selectable drying
level.
j Optical interface
This is used by the Service depart-
ment as a transmission point.
20
k Programme selector
For selecting programmes and for
switching the appliance off. The
tumble dryer is switched on by se-
lecting a programme and switched
off by turning the programme se-
lector to the  position.
MobileStart  and Wash2Dry 
offer alternative methods of select-
ing programmes if the tumble dryer
is connected to the WiFi network.
Under Further programmes/ you
will find:
– More programmes
– The option to change Settings

Operating the sensor controls

The sensor controls react to fingertip
contact. Selection is possible as long
as the respective sensor is illuminated.
If a sensor is brightly lit, this means:
currently selected
If a sensor is dimly lit, this means: se-
lection possible