Table of Contents
Advertisement
CHAPTER 4: SOFTWARE
NOTE:
NOTE
DGT DISTRIBUTED GENERATION TRIP CONTROL SYSTEM – INSTRUCTION MANUAL
4.
When you click on Save, the following dialog box (form) will appear:
5.
Below is an example of a typical form:
The first two fields - System Name (minimum 1 character) and Security ID (minimum 2
characters) are mandatory fields. Unless you fill them in with some values, the OK button
will remain disabled, so that it will not be possible to save your changes to the file. Some
other restrictions are applied to the content of these fields:
•
Field "System Name" must contain at least 1 and maximum 64 characters
•
Field "System ID" must contain at least 1 and maximum 64 characters. No any
national alphabet symbols (but English) are allowed here.
•
Fields "Serial Number" can contain from 1 to 64 characters, but they can be digital
characters only.
ENERVISTA DGT-UTILITY SETUP SOFTWARE
4–35
Advertisement
Table of Contents
