ENERVISTA DGT-DG SETUP SOFTWARE
4–28
2.
Once you have installed your EnerVista DGT-DG Setup program, start the program as
indicated earlier. The main screen will appear as follows
3.
Press the Quick Connect button near the top left edge of the screen. The following
window will appear:
4.
Using the dropdown box shown above, select the COM port (to which you have
connected your communications (RS232) cable) and press the Connect button. The
program will search for your connected DGT-D unit and after a few seconds, will insert
information on the main screen as shown:
DGT DISTRIBUTED GENERATION TRIP CONTROL SYSTEM – INSTRUCTION MANUAL
CHAPTER 4: SOFTWARE