Kenwood NEXEDGE NX-57 Series Installation Manual page 18

RadioPro IP Gateway
If using NXDN on a conventional system, use the
sent to the Data Channel:
i. Specify the channel to use for data by assigning the
ii. Enter a value for
iii.
Installation and Configuration Guide NEXEDGE NX-57xx/58xx
required for your system.
Base ID Type
Enable the desired messages
Note: If the Base ID does not include the Control Station(s), data will not be sent to RadioPro
clients.
NXDN
section to ensure that the correct data will be
Data Zone-Channel (NXDN)
and Base ID.
to send across the Data Zone-Channel with a Check.
18
field as