Kenwood NEXEDGE NX-57 Series Installation Manual page 11

RadioPro IP Gateway
5. Configure FleetSync Settings
a. Expand the
b. Enable all options in the
c. Enable all options in the
6. Configure NXDN Settings
a. Expand the
b. Enable all options in the
c. Enable all options in the
Installation and Configuration Guide NEXEDGE NX-57xx/58xx
FleetSync folder, then select
Serial Output
Stack
section.
NXDN folder, then select
Serial Output
Stack
section.
FleetSync Information.
section, except for Transparent Header.
NXDN Information.
section, except for Transparent Header.
11