LG LW2100AP User Manual page 9

LW2100AP User's Manual
Version 1.4
2002.05.14
5. onsole cable connection
Using the Console cable included in the package, connect a Serial port of the administrator
computer to the Console port of LW2100AP. One end of the console cable with the RJ45
connector is connected to the console port on the back panel of the system and the other
end is connected to the 9-pin serial port of a RS-232 based terminal such as workstation, PC
or notebook as shown in the following figure. Then, fix the cable to the AP using the screws
hanging on both sides of the connector.
Router Console Port
Terminal port (male)
Copyright© 2002 LG Electronics Inc., LTD.
Page 10 of 46