Page 2
Cert. No. Q 05907 As a part of ABB, a world leader in process automation technology, we offer customers application expertise, service and support worldwide. EN 29001 (ISO 9001) We are committed to teamwork, high quality manufacturing, advanced technology and unrivalled service and support.
A1.1 Programming The Transmitter with a Data ..Terminal ............11 Login A1.2 Using Personal Computers with MagMaster . 11 A1.2.1 PC Tools ........... 12 A1.2.2 Windows ‘TERMINAL’ ...... 12 A1.2.3 Odyssey and Procomm Plus .... 12 Filing Cabinet Analogy A1.2.4 ‘VBC’...
2 CONFIGURING THE TRANSMITTER The Transmitter is delivered set up either with your chosen units, or set with our standard default values. If you need to change the transmitter configuration for any reason, this may be done by connecting a terminal device e.g. Personal Computer, Electronic Organiser etc., to the transmitter via the 9-way D-Type connector, found by sliding the movable section of the transmitter cover in the direction of...
…2 CONFIGURING THE TRANSMITTER 2.2 Looking at the Main Menu Read 1> Read 1 > FILING CABINET Disp 2 > ANALOGY Read Part of Main Menu Disp Disp 2 > Login 3 > Login Quit ? Login 3 > Quit Q > Quit Q >...
Page 6
CONFIGURING THE TRANSMITTER… Read 1 > Read 1 > Read 1 > Read 1 > Disp Mode 1 > Login En 1 > Bye > Read Flow > 32.49 'Disp Mode' (Item 1 of 'Disp' 'Read Flow' (Item 1 of 'Read' 'Login En' (Item 1 of 'Login' 'Quit' menu) opened and parameter...
…2 CONFIGURING THE TRANSMITTER 2.4 The Main Menu SECURITY ACCESS Read Read flow rate, totaliser etc. Read 1 > No security password required Disp Set display options Disp 2 > (Level ‘0’) Enter Security Password for parameter access Login Login 3 >...
CONFIGURING THE TRANSMITTER… 2.5.2 Gaining Access to the Engineer Level Read 1> From ‘ ’. 2.1 Getting Started Entering ‘3’ accesses ‘Login’ item from Main Menu. Read 1> Login En 1> ‘0’ indicates security access level 0 is in operation. Entering ‘1’...
…2 CONFIGURING THE TRANSMITTER Entering ‘1’ selects this parameter. Flow Rng 1> 88.50 Flow Rng ‘?’ shows that you can change this value. 88.50 ? Enter a new value of % Flow Range. Flow Rng 1> 88.50 ? 234.5 Flow Rng New range setting of 234.5 now in use.
CONFIGURING THE TRANSMITTER… 2.6.3 Alarm Parameters Note. Alarm Parameters are selected with a ‘1’ and deselected with a ‘0’ as shown in the previous flow unit types, but any combination of Alarm Parameters may be selected or deselected as required. Automatic deselection of parameters not required does not take place with alarm parameters.
• Take all precautions to avoid risk to personnel, plant and devices connected to the MagMaster to be tested over the full risk of explosion in hazardous areas. range of flow rates (see WARNING below).
The following is a sample of typical communications programmes and setup details for interfacing with the MagMaster™. A personal computer can be used to communicate with MagMaster to set up its operating parameters. The only requirements are: 1) The computer can be any make or type (eg. Apple, BBC, Atari, Amiga, PC etc.) but it must be equipped with a serial communications port capable of operation at 4800 baud.
A1.3 Quick Set-up for Psion Series 3 The following instructions are a quick guide to setting up a Psion Series-3 for use with a MagMaster. Refer to the Psion Series- 3 Instruction Manuals for full information. These steps are only necessary the first time that the Series 3 is used. If your Psion Series 3 was supplied by ABB Kent-Taylor, the Comms.
Page 15
Internal Type in a suitable name, eg. ‘MagMastr’ (8 characters max.) and press , to save the settings for future use. Enter The Series 3 is now ready for use with the MagMaster transmitter, as described in this Configuration Manual.
Note. It is recommended that the mains adapter is used to power the ‘Organiser’ where possible. 1. Connect the Psion Organiser Communications Link Adapter to the MagMaster Transmitter using a suitable adapter lead consisting of a 25-pin D-Type plug to 9-pin D-Type socket (available as a Psion accessory).
…APPENDIX B B1.2 Description of Parameters Select the access number or letter, of any of the items in the Main Menu, followed by a CR ( etc), to access its associated RETURN sub-menu. It is not necessary for the parameter to be displayed to select it by number. Note.
Page 20
APPENDIX B… …B1.2 Description of Parameters Information. THE FOLLOWING PARAMETERS REQUIRE ‘LEVEL 1’ OR ‘LEVEL 2’ ACCESS. (Enter passwords in ‘Login En’ parameter above). Main Menu Sub-menus Remarks Flow 4> Enter main full scale (100%) flow range (Upper Flow Rng 1 >...
Page 21
…APPENDIX B …B1.2 Description of Parameters Main Menu Sub-menus Remarks Flow Probe 6 > Set additional parameters for insertion probes. Insertion factor for probes (default = 1.000). Flow Probe Ins 1> 1.000 Flow profile correction factor (default = 1.000). Flow Probe Prof 2>...
Page 22
APPENDIX B… …B1.2 Description of Parameters Main Menu Sub-menus Remarks 7> Select totaliser measurement units Tot Unit 1 > Enter a '1' in ONE parameter ONLY to select required units: Litres Tot Unit Ltr 1> 1 Cubic metres Tot Unit m^3 2>...
Page 23
…APPENDIX B …B1.2 Description of Parameters Main Menu Sub-menus Remarks 8 > Select Alarm 1 output functions. ‘1’ = selected. ‘0’ = deselected Alm No1 1 > Idle state for alarm output. Alm No 1 Idle 1> 0 With no alarm active: 0 = Low (O/P transistor ON) 1 = High (O/P transistor OFF) Alm No 1 En...
Page 24
APPENDIX B… …B1.2 Description of Parameters Main Menu Sub-menus Remarks Set up function of external logic input (EXT I/P+, EXT I/P- terminals on transmitter cable termination BLK2). Input 9 > Active level on contact input selects Analogue Range 2 Input Anlg 1 >...
Page 25
The maximum which can be entered must not exceed 21000. The value entered may be displayed with a small error in the decimal digits e.g. 1.900 may be displayed as 1.899. This is a display characteristic and the value 1.900 will be used by the MagMaster. END OF PARAMETERS...
Page 27
Service and Repair Centre. – Food & Beverage – Manufacturing United Kingdom – Metals and Minerals – Oil, Gas & Petrochemical ABB Limited – Pulp and Paper Tel: +44 (0)1453 826661 Fax: +44 (0)1453 829671 Drives and Motors United States of America •...