Fcc Radiation Exposure Statement; Resistibility Requirements Compliance; Electrical Safety Guidelines - Nokia HA-0236G-A Product Manual

Nokia WiFi HA-0236G-A Extender Product Guide
2.2.4
2.2.5

2.3 Electrical safety guidelines

Issue 01

FCC Radiation Exposure Statement

This device complies with FCC radiation exposure limits set forth for an uncontrolled
environment and it also complies with Part 15 of the FCC RF Rules. This equipment
must be installed and operated in accordance with provided instructions and the
antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 26 cm from all persons and must not be co-located or operating
in conjunction with any other antenna or transmitter. End-users and installers must
be provided with antenna installation instructions and consider removing the
no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1 this device may not cause harmful interference, and
2 this device must accept any interference received, including interference that
may cause undesired operation.
Note 1 —
channels 1 to 11 can be operated. Selection of other channels
is not possible.
Note 2 —
Caution —
approved by the party responsible for compliance could void
the user's authority to operate the equipment.

Resistibility requirements compliance

The customer premises equipment complies with the requirements of ITU
Recommendation K.21 for resistibility of telecommunication equipment installed in
customer premises to overvoltage and overcurrents.
This section provides the electrical safety guidelines for the customer premises
equipment.
3FE-48251-AAAA-TCZZA
For product availability in the USA and Canada, only
This device is restricted for indoor use.
Any changes or modifications not expressly
ChapterTitleVariable
19