Measuring Object Temperatures - Silvercrest SFT 81 Manual

30 GB/IE/NI
338571_2001_silv_Multifunktionsthermometer_Content_IE_NI_DK_BE_NL.indd 30 338571_2001_silv_Multifunktionsthermometer_Content_IE_NI_DK_BE_NL.indd 30
If the measured value lies within the normal range
(<38°C / 100.4°F), the LED above the display
will light up green for 3 seconds. If the measured
value is higher than this (≥ 38°C/100.4°F =
fever), the LED will light up red.
If you have activated Bluetooth
data will be transferred after the measurement. The
thermometer displays the symbol for Bluetooth
during transfer.
Note: The "HealthForYou" app must be activated
for transfer to occur. If the current data is not dis-
played on your smartphone, repeat the transfer
process as described in the chapter "transferring
measured values".
The device will switch off automatically after 60
seconds (if no Bluetooth
or press the ON / OFF / MEASURE button
for 5 seconds to switch it off.
Clean the device after every use as described in
the chapter "Cleaning and care".

Measuring object temperatures

To switch on the multi-function thermometer, press
the ON / OFF / MEASURE button
second.
Then press the M button
at the same time for 3 seconds to change to the
object temperature mode. appears on the LC
display.
data transfer, the
®
connection is available)
®
for one
8
and the S button
7
®
8
6
26.05.20 10:55 26.05.20 10:55