Table of Contents
Advertisement
Device description
2.4 LED status indicator
2.4
LED status indicator
The operating states of the transponder are indicated by the LEDs. The states can be off , on
and flashing .
RADIO LED (D1)
RUN LED (D2)
BUS LED (D3)
12
Meaning
Off when the transponder is not transferring any data via wireless
Lights up for 1 second on system start
Flashes yellow once per second if data was transferred in the previous second
Meaning
Off when the transponder is inactive
Lights up for 1 second on system start
Flashes green every 0.2 seconds after a watchdog reset
Flashes every three seconds when the device has not detected any movement
Lights up permanently when the device has detected movement
Meaning
Off when the transponder is not sending or receiving any data via the CAN bus
Lights up for 1 second on system start
Flashes yellow once per second if data was transferred via the CAN bus in the
previous second
Operating Instructions, 05/2021, C79000-G8976-C522-04
SIMATIC RTLS4460T
Advertisement
Table of Contents
