Table of Contents
Advertisement
4 Configuration and Settings
4.3 Configuring time-of-day synchronization from LOGO! CMR via NTP server
No.
2.
1.
Navigate to "WAN > mobile wireless settings" and activate the "Activate data connection
via the mobile wireless network" checkbox.
2.
Enter the access details of your mobile network operator if you are able to use the mobile
data services (internet) of the mobile network operator.
Note:
In this example, entering the access detail "APN" is sufficient. If necessary, check again
whether further access details are necessary, depending on which mobile network
operator you use. The access details (APN, user name, password) can be requested
directly from your provider.
3.
Enter the user name (available from the mobile service provider), if requested by your
provider as access control.
4.
Enter the password (available from the mobile service provider), if requested by your
provider as access control.
5.
Specify whether the password and the user name of your provider shall be transferred with
a certain authentication method. In this example, the authentication method "None" for no
authentication was selected.
Note:
Further information on the various authentication methods is available in the manual on
LOGO! CMR in Chapter
6.
Click on "Apply" to save the settings.
LOGO! Set 1
Entry ID: 109063024,
V1.0,
Action
"APN/ User name/
2
3
4
07/2015
Password".
1
5
6
17
Hide quick links:
Advertisement
Table of Contents
