Table of Contents
Advertisement
4 Configuration and Settings
4.1 Configuring LOGO! CMR for sending/receiving SMS messages
No.
3.
When initially logging on, you enter the Login "admin" and the Password "admin" (factory setting).
Then you need to assign your own password.
4.
Navigate to "WAN > Mobile wireless settings"
and make the following settings:
1.
Activate the "Activate mobile wireless interface" checkbox.
2.
Enter the PIN of the SIM card inserted in the LOGO! CMR.
3.
Click on "Apply" to save the settings.
5.
Navigate to "WAN > SMS" and make the following settings:
1.
Activate the "Allow receipt of SMS messages" checkbox.
2.
To be able to send SMS commands to LOGO!, enter any password in "Password for write
commands".
Note:
The configuration file supplied with this application contains the password "SMSwrite" as the
password for write commands.
3.
Click on "Apply" to save the settings.
LOGO! Set 1
Entry ID: 109063024,
V1.0,
1
3
07/2015
Action
1
2
3
2
10
Hide quick links:
Advertisement
Table of Contents
