Brother 1030e User Manual page 32

Setting the F/T Ring Time
You need to determine how long the machine will give its special F/T pseudo-ring when you have a
voice call. This ringing happens after the initial ringing from the phone company. Only the machine
rings for 20, 30, 40, or 70 seconds; no other phones on the same line during the special F/T
pseudo-ring.
1
Press Menu/Set, 2, 2.
2
Press or
call, and press Menu/Set when the screen displays your selection.
3
Press Stop/Exit.
Even if the caller hangs up during the F/T pseudo-ringing, the machine continues
the F/T pseudo-ringing for the set time.
Please note that some faxes cannot be received automatically in F/T mode, because some fax
machines do not send the standard Group 3 calling tone ("CNG")
This machine does not generate ringing conditions to any extension
telephones. Any such extension telephones will only ring during the period
set on ring delay.
Recording the Fax/Tel Outgoing Announcement (F/T MESSAGE)
(Only for FAX-1030e)
This is the announcement played by your machine (not an external TAD) when someone calls and
your machine is set to F/T mode. Although callers hear your announcement, they cannot leave a
message. See Erasing the Outgoing Message (OGM), page 62 for directions to erase the
announcement.
1
Press Menu/Set, 8, 3. The screen prompts you to choose F/T MESSAGE, TAD MESSAGE
or PAGING MSG..
2
Press or
3
Press or
record a message.
4
Replace the handset. Your announcement is played.
5
Press Stop/Exit.
It is not necessary to have an outgoing message. The F/T mode will work fine
without one. It is only to help the caller understand the status of your machine.
For example, you can leave a message that says:
"Hello, please wait, we are trying to connect you. If you wish to send a fax, please wait until you
hear a fax tone and press the Start key, or, press
press the Start key."
26
Chapter 3
to select how long the machine will ring to alert you that you have a voice
to select F/T MESSAGE, and press Menu/Set.
to select RECORD MSG and press Menu/Set, then pick up the handset to
, but this is not common.
5 1 (your three-digit remote activation code) and