Toro Groundsmaster 5900 Installation Instructions Manual page 5

1. Ring terminal—28 + F
V
and ring terminal—battery
cable
2. Nut
6. Install the wire connector labeled
M C
ASTER ONTACTOR
of the contactor
7. Assemble the ring terminal labeled 28
of the machine wire harness onto the left post of
the fuse holder (Figure
8. Assemble the ring terminal of the battery cable
onto the left post of the fuse holder and use the
previously removed nut to secure the terminals
to the post (Figure
9. Torque the nuts that secure the connectors to
the fuse-holder posts to 14 N∙m (10 ft-lbs).
10. Install the red insulator and ring terminal labeled
S L O
OLENOID INE
(Figure 11) to the left post of the contactor.
Figure 10
3. Wire connector—
USE
[28 M C
V ASTER ONTACTOR
4. Wire connector—
[28 M C
V ASTER ONTACTOR
COIL
] to the right post at the top
(Figure 10).
V
10).
10).
[28 M C
UT V ASTER ONTACTOR
g282538
1. Fuse-holder cover
+
COIL
]
-
COIL
]
11. Torque the nuts that secure the connectors to
the contactor posts to 5 to 6 N∙m (40 to 50 in-lb).
- [28
V
12. Close the cover of the fuse-holder
until the cover snaps closed securely.
+ F
USE
]
5
Figure 11
2. Ring terminal (S
L O [28 M
INE UT V
C ])
ONTACTOR
(Figure
g282534
OLENOID
ASTER
11)