Toro RECYCLER 59113 Installation Instructions

Since this instruction sheet covers only a minimal
amount of information necessary to maintain and
operate your mower, we suggest that you keep this
material with your Operator's Manual so that both
may be referred to for instructions concerning safe
operation and proper maintenance procedures.
Your Recyclerr mower has been updated to
permit side discharging. Make sure that your
dealer is aware of this whenever parts are
ordered or servicing is required.
Kit Contents
DESCRIPTION
Side Discharge Chute
Installation Instruction Sheet
Operation
Using Side Discharge Chute
1. Stop the engine and wait for all moving parts to
stop.
RECYCLER
DISCHARGE CHUTE KIT
MODEL NO. 59113
2. Ensure discharge door handle is fully forward
(Fig. 1).
1. Chute frame on retaining
QTY.
post
2. Pin
1
1
3. INSTALLING CHUTE—Slide hole in side
discharge chute onto retaining post on discharge
tunnel (Fig. 1).
IMPORTANT: Chute tab must be positioned in
front of wide portion of rear housing wall as
shown in Figure 2.
EThe Toro Company – 1995
All Rights Reserved
FORM NO. 3317–786
r
MOWER SIDE
INSTALLATION
INSTRUCTIONS
1
3
Figure 1
3. Handle fully
forward–discharge door
closed
2
1917