Silvercrest KH 2431 Operating Instructions Manual page 111

Toggle between MONO and STEREO
Automatic station search
Manual station selection
GB
Saving radio stations
Accessing saved stations
108
♦ Press the button MODE
During stereo reception the symbol
♦ Press and hold the buttons I◂◂
The search will stop when a station is found.
♦ Press the buttons I◂◂
0.05 MHz steps until the desired frequency is set.
You can save up to 30 radio stations.
♦ Press the button MEMORY/PROG.
last selected memory location will blink .
♦ Select with the buttons I◂◂
press the button MEMORY/PROG.
♦ Press and hold the button MEMORY/PROG.
the display.
♦ Select with the buttons I◂◂
NOTE
► If for about 3 seconds you do not press either of the buttons I◂◂
the device returns to its previous operating mode (station search).
Service and Operation
twice to toggle between MONO and STEREO.
is indicated on the display.
or ▸▸I to start a station search.
or ▸▸I briefl y to change the frequency in
. On the display the number of the
or ▸▸I the desired memory location and
.
or ▸▸I the desired radio station.
until -- -- is indicated on
or ▸▸I ,
KH 2431