Silvercrest KH 2431 Operating Instructions Manual page 110

Service and Operation
Operation during playback
♦ To pause the playback, press the button PHONO ▸II
and the tone arm remains in its current position.
IMPORTANT
Possible damage to the record or the needle.
If playback is stopped when the needle is still on the record it can lead to
damage.
► Move the lever
PHONO ▸II
♦ To resume an interrupted playback, press the button PHONO ▸II
then move the lever
♦ To stop playback, press the button PHONO
the tone arm returns to its starting position.
Radio operation
NOTE
► For good radio reception the wire aerial
Align the aerial in radio mode for the best reception.
► The technical characteristics of the device permit reception of selectable
frequencies beyond the VHF (FM) range of 87.5-108 MHz. In some countries
various national regulations regarding the allocated radio frequency range
can exist. Please note that information received outside of the assigned radio
frequency ranges may not be exploited, passed on to third parties or
otherwise misused.
Switching the radio function on
♦ Press repeatedly on the button FUNCTION
on the display.
KH 2431
to the forward position before you press the button
.
to the rear position.
. The turntable stops
. The turntable stops and
must be completely unwound.
until TUNER is indicated
GB
and
107