Advertisement
The Ethernet settings window appears.
NOTE
If there are multiple Ethernet choices, select the one that is connected to the device.
4.
Confirm that "Using DHCP" is selected in "Configure IPv4" or "Configuration."
5.
Click "Apply" if you have changed the setting, then close the window.
If you haven't changed the setting, close the window.
Updating the firmware
NOTE
If any warning messages, such as those related to "User Account Control" or "Windows Security,"
appear during the procedure, follow the on-screen instructions to continue.
1.
Store the firmware update file "FWUpdate_AIC128-D_vxxx.dnt" in a directory that does not
contain any multi-byte characters.
6
Advertisement
