Main Unit Replacement; Replacing The Main Board - Toshiba ST-B10 Series Maintenance Manual

3. MAIN UNIT REPLACEMENT

3. MAIN UNIT REPLACEMENT
1. Disconnect the power cord before installing the main parts.
2. Be careful not to short-circuit the Lithium Battery on the ENGINE PC board.
3. Be careful not to injure your fingers when replacing the main parts.

3.1 Replacing the Main Board

1) Open B10 PLT TOP COV by loosing the plastic thumbscrew.
2) Slide B10 PLT TOP COV out from B10 PLT BTM.
1) Press Top Cov in
these 2 directions
Press Top Cov in
these 2 directions
WARNING!
Loosen the
thumbscrew
3- 1
EO18-12017
3.1 Replacing the Main Board