5.
Remove the power connector cable from the computer (5).
Reverse this procedure to install the power connector cable.
Fan
To remove the fan, use this procedure and illustration.
Table 5-10
Fan description and part number
Description
Fan for use in models with discrete graphics memory
Fan for use in models with UMA graphics memory
Before removing the fan, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the fan (UMA models):
1.
Disconnect the fan cable from the system board (1).
2.
Remove the three Phillips M2.0 × 3.0 screws (2) that secure the fan to the computer.
40
Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
Battery on page
29).
27).
Spare part number
M16664-001
M16665-001
27).