Advertisement
Introduction
The HP 82153A Wand enhances your HP-41C system by adding a new dimension to calculator control. The wand lets you take
advantage of bar coded HP-41C programs, data and even individual HP-41C calculator functions. So that you can fully use the
wand's capabilities in your HP-41C system, take time to work through the few pages in this manual. You will find the wand simple to
operate, yet useful in a wide range of applications.
Plugging the Wand Into the HP-41C
1. Make sure the HP-41C is turned off.
2. Remove the port cap from any unused port. (The wand should always be
plugged into a higher numbered port than any memory modules you may be
using.)
3. Insert the wand interface module into the empty port. Push it into the
calculator until it snaps firmly in place.
HP 82153A - Wand Owner Manual - page 5
Advertisement
