T-Mobile High-Speed Internet Gateway Operator
Manual
Procedure 12
9.5 Viewing status information
Issue: DRAFT
Logging into the web GUI
To log into the T-Mobile High-Speed Internet Gateway using the web GUI:
1
If you have not done so yet, complete the steps in procedure 10.
The Overview Dashboard screen appears with the web GUI menu.
2
Click Log In.
The Login screen appears.
3
Using the information from the label on the bottom of the T-Mobile High-Speed Internet
Gateway, enter the Super (access rights) Username and Password.
REVIEW QUESTION: Where does the Operator find the Superadmin credentials??
4
Navigate to one of the following procedures:
•
Network
•
Wi-Fi networks: 2.4 GHz and 5 GHz (Procedure 21)
•
Access Point (Procedure 22)
•
ACS Auto Configuration Server (Procedure 23)
•
System
•
Reboot Device - Web GUI (Procedure 24)
•
Factory Reset - Web GUI (Procedure 25)
•
Firmware Upgrade (Procedure 26)
•
Enable Debug Control (Procedure 27)
5
STOP. This procedure is complete.
Use the T-Mobile High-Speed Internet Gateway web GUI to view the following status
and information:
•
Data Usage (see Procedure 13)
•
SIM (see Procedure 14)
•
Cellular Network and Access Point (see Procedure 15)
Nokia 3TG-01275-AAAA-TCZZA
ChapterTitleVariable
73