T-Mobile High-Speed Internet Gateway Operator
Manual
3.2 Safety standards compliance
3.2.1
Issue: DRAFT
Sample safety label- High-Speed Internet Gateway
Figure 2
This section describes the T-Mobile High-Speed Internet Gateway compliance with
North American safety standards.
Warning —
approved by the party responsible for compliance could void
the user's authority to operate the equipment.
EMC, EMI, and ESD compliance
The T-Mobile High-Speed Internet Gateway equipment complies with the following
EMC, EMI, and ESD requirements:
•
Federal Communications Commission PART 15-RADIO FREQUENCY DEVICES
Subpart C-INTENTIONAL RADIATORS Title 47 CFR Part 15. Part 15.247, Part
15.255
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications
Nokia 3TG-01275-AAAA-TCZZA
Changes or modifications to this unit not expressly
ChapterTitleVariable
23