Setting The Update Function; Setting The Automatic Dimmer Function - Silvercrest SIUR 10 A1 Operating Instructions Manual

Setting the update function

Setting the automatic dimmer function

GB
134
Using this function, the device can automatically update the settings for the clock
based on the RDS data.
Precondition: The device is in clock/standby operating mode.
♦ Touch the Set|OK control point
on the remote control nine times.
♦ Press the i /i control points
/ on the remote control to switch the function on (
♦ Touch the Set|OK control point
on the remote control again to save the current setting and to change to the
next menu item.
You can use this function to switch the automatic dimmer function on or off , and
to set a period over which the display background illumination will automatically
be dimmed.
Precondition: The device is in the clock/standby operating mode.
♦ Touch the Set|OK control point
on the remote control 10 times.
♦ Press the i /i control points
/ on the remote control to switch the function on (
♦ Touch the Set|OK control point
on the remote control again to save the current settings and to change to
setting the dimmer function period.
The hour display will blink at the same time.
♦ Press the i /i control points
keys / on the remote control to set the time at which the display should
be dimmed. Next, touch the
on the remote control, and the minute display will blink.
♦ Press the i /i control points
keys / on the remote control to set the minutes for the time at which
the display should be dimmed.
♦ Touch the Set|OK control point
on the remote control.
display will blink at the same time.
on the device or press the Set OK key
UPDATE
will appear on the display
/ on the device or press the i /i
on the device or press the Set OK key
on the device or press the Set OK key
AUTO DIM
will appear on the display
/ on the device or press then i /i
on the device or press the Set OK key
DT START
will appear on the display
/ on the device or press then i /i
control point
/ on the device or press then i /i
on the device or press the Set OK key
DT END
will appear on the display
.
keys
ON OFF
) or off ( ).
.
keys
ON OFF
) or off ( ).
or press the i key
. The hour
SIUR 10 A1
.