GE LOGIQ E9 Service Manual page 527

GE H
EALTHCARE
D 5180263-100, R
IRECTION
Table 8-77
4.
Remove the two Phillips screws securing
the HDD and Bracket to the BEP frame.
5.
Pull/slide the HDD out of the BEP, and
Bracket to the BEP frame. Slight force may
need to be applied since the HDD fits tightly
into the BEP motherboard.
Note the HDD installation guides.
5
EV
HDD removal
Steps
Chapter 8 Replacement procedures
LOGIQ E9 Service Manual
Corresponding Graphic
HDD mounting screws
HDD removal
HDD installation guides
8 - 163