Before Use; Unpacking; Inserting / Replacing The Batteries; Basic Operation - Silvercrest SDR 1 A1 Operation And Safety Notes

˜ Before use
˜ Unpacking
Remove all packaging materials
(including foils). Check if all parts
are present.
˜ Inserting / Replacing
the batteries
NOTE: The product can be used
with batteries or via the power
adaptor . The batteries should
15
be removed when the product is
powered via the power adaptor.
Open the battery compartment
Insert 4 batteries (type: 1.5 V
, AA) into the battery com-
partment according to the polarity
marks.
Close the battery compartment
˜ Basic operation
Place the product on a flat, stable
ground.
Operation by power adaptor
Power Connect the power
supply adaptor
wall outlet. The product
enters standby mode.
Turning on Press
Turning to
Press
standby
date are permanently
displayed.
12
12
to a suitable
15
1 .
1 . Time and
Operation by batteries
Power Insert 4 batteries (AA).
supply The product remains in off
mode.
Turning on Press
Turning off Press
goes out in off mode to
save battery power.
NOTES:
If the product is used for the first
time, it will automatically enter
into the DAB mode and perform
.
a complete scan. During the scan
Scanning... appears in the
display 2 .
For a better signal reception
. always expand the telescopic
antenna
11
the telescopic antenna can be
rotated and swivelled.
1 .
1 . Display
. For optimal reception,
GB/IE 31