Muting The Sound; Setting The Time - Silvercrest CM-3500 User Manual And Service Information

Muting the Sound

Press the MUTE button (36) on the remote control to mute the sound.
Press the MUTE button (36) again or press any volume adjustment button
to resume the sound output.
While the sound is muted, a dashed-out speaker icon will
appear on the display (3).

Setting the Time

It is only possible to set the time while the unit is in standby mode.
If powered on, press the On/Standby button (15) on the device or the
On/Standby button (27) on the remote control to power the device off.
Press and hold the DISPLAY button (10) on the device or the
CLOCK/DISPLAY button (29) on the remote control until the display (3)
toggles to "12 HR" or "24 HR".
Press the UP (7) or DN (8) buttons to toggle between the 12-hour (12 HR)
and 24-hour clock format (24 HR).
Press the DISPLAY button (10) on the device or the CLOCK/DISPLAY
button (29) on the remote control to confirm. The set time will appear on the
display and the hours display will blink.
Press the UP (7) or DN (8) button to select the hours of the current clock
time.
Press the DISPLAY button (10) on the device or the CLOCK/DISPLAY
button (29) on the remote control to confirm. The set time will appear on the
display, the minute display will blink.
Press the UP (7) or DN (8) button to select the minutes of the current clock
time.
Press the DISPLAY button (10) on the device or the CLOCK/DISPLAY
button (29) on the remote control to confirm.
The time has been set successfully and the device switches to standby
mode.
SilverCrest Stereo Hi-Fi System CM-3500
English - 17