Ecm - Huawei FusionModule2000 Product Description

FusionModule2000 Smart Modular Data Center
Product Description
Figure 5-40 Signal panel on the control module
(1) Ground terminal
(5) Indicators for ECM 1
(9) Indicators for ECM 2
(13) RS485 port
(17) Battery temperature
sensor port

5.2.2.4.2 ECM

The control module consists of two ECMs that work in active/standby mode. Each card
provides two ports, that is, a BSC port in the upper part and a reserved parallel port in the
lower part.
Figure 5-41 ECM
Table 5-21 Ports on the ECM
Silk Screen
PARALLEL
BSC
Issue 06 (2020-05-21)
Ports are protected by a security mechanism.
Copyright © Huawei Technologies Co., Ltd.
(2) Parallel port 1
(6) Parallel port 2
(10) Dry contact card
(14) Fast Ethernet (FE)
port
(18) Optional card
subrack cover
Description
The PARALLEL port transmits parallel signals.
The BSC port is used in a dual-bus system to synchronize
output frequencies and phases between UPS systems,
5 Power Supply and Distribution System
(3) BSC port (4) Ready switch
1 on ECM 1
(7) BSC port (8) Ready switch
2 on ECM 2
(11) Dry (12) MDU port
contacts
(15) COM2 (16) COM1 port
port
49