Table of Contents
Advertisement
Table of contents
6.2.1.1
Overview of steps
Communication proceeds in the following steps:
1
Connect PC to the established wireless
access point
–
2
–
–
Start desktop sharing
–
–
6.2.1.2
Setting up a Wireless Access Point
To establish a connection between a local expert PC and the SIPIX Service Tool,
the existing company network can be used. If this is not possible due to the
company's IT requirements, you can set up a stand-alone simple wireless access
point via a Wi-Fi router, a smartphone hotspot, or a Wi-Fi LTE router. An internet
connection is not necessary.
6.2.1.3
Preparing SIPIX MO/SD ZN
1. Start the tablet.
2. Connect the tablet to the access point you have set up. Information on this can
be found in the Section 5.2.
3. Double-click the "SIPIX RC" icon on the tablet's home screen to launch the
application.
The web page "SIPIX RC Remote" will be opened automatically in the "Chromium"
browser. Since the web server application is started in the background, it may take
a few minutes before the browser is launched.
SIPIX MO/SD ZN
Entry-ID: 109792654, 04/2021
Expert (PC)
Find the IPv4 address of the
SIPIX Tablet in the internal
network
Enter the IPv4 address of the
SIPIX Tablet in the browser as
follows:
https://xxx.xxx.xxx.xx:5001
Establish a remote connection
to the tablet
Launch "TightVNC" software
Connect to the tablet
Field Service Engineer (Tablet)
Prepare SIPIX MO/SD ZN:
–
Start
–
Connect to the established wireless
access point
–
Start the "SIPIX RC" application
Start audio/video conference
Accept desktop sharing
40
Advertisement
Table of Contents
