Siemens SIPIX MO/SD ZN Operating Manual page 36

Table of contents
5.6 Changing the Touch Screen Operation Mode
The tablet PC supports three integrated operating modes for different use cases:
Operating
mode
Hand/Rain
(default)
Pen
Glove
5.6.1 Toggle touchscreen mode
To switch the touch screen mode, proceed as follows:
1. Open the HotTab menu by pressing
2. Select "Device ON/OFF" and then click the "Touch Set" icon.
3. The "Touch Mode" selection function appears as shown below.
4. Select the desired mode under "Touch Mode" by enabling the checkbox
SIPIX MO/SD ZN
Entry-ID: 109792654, 04/2021
In Hand/Rain mode, incorrect entries made by liquid drops on the
touchscreen are rejected. When the liquid is removed, the
touchscreen accepts input from bare fingertips. The input is
supported with:
–
Active stylus with Palm Rejection (palm is ignored)
–
Passive stylus with rubber tip
–
Bare fingertips
In Pen mode, the touchscreen supports input with the passive
capacitive fine-tip stylus (included with the tablet).
The input is supported with:
–
Passive stylus with fine tip and palm rejection (palm is
ignored)
–
Active stylus with Palm Rejection (palm is ignored)
–
Passive stylus with rubber tip
–
Bare fingertips
In glove mode, the touchscreen supports inputs that the user makes
with gloved fingers.
The input is supported with:
–
Glove
–
Passive stylus with rubber tip
–
Bare fingertips
Description
on the front panel.
36