Replacing An Ecc800-Pro Psu - Huawei FusionModule1000A40 Maintenance Manual

FusionModule1000A40 Prefabricated All-in-One
Data Center
Maintenance Guide
Step 5 (Optional) Remove the SIM card from the corresponding slots of the ECC800-Pro
main control module.
Step 6 (Optional) Install the removed SIM card in the corresponding slot of the new
ECC800-Pro main control module.
Figure 5-21 Installing a SIM card
Step 7 Install the spare ECC800-Pro main control module in the ECC800-Pro subrack and
tighten the screws on both sides of the ECC800-Pro main control module.
Step 8 Connect the communications cables and antennas to the ECC800-Pro main control
module.
Step 9 Choose Maintenance > Configuration File and import the backup configuration
file, or set parameters for the devices that connect to the ECC800-Pro to ensure
normal communication.
----End

5.3.2 Replacing an ECC800-Pro PSU

Prerequisites
Do not touch the terminals in the rear of a removed PSU to avoid electric shocks.
●
●
Context
The PSU is hot-swappable.
Procedure
Step 1 Push the locking latch in the upper right corner of the PSU panel leftwards.
Step 2 Pull out the handle of the PSU to remove the PSU from the subrack.
Issue 04 (2021-02-10)
D ANGER
Tool: insulation gloves
Materials: a reserved undamaged and undeformed PSU of the appropriate
model.
Copyright © Huawei Technologies Co., Ltd.
5 Parts Replacement
79