Table of Contents
Advertisement
'Select from the available options' (continued)
ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
Available Boards – Current target board is: A, MC145220 Dual
Brd [A]!: MC145220 Dual
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
MC145xxx Frequency Commands – Current Output Frequency is 70 MHz
[L]! Set to low freq.
[M]! Set to med. freq.
[H]! Set to high freq.
[U]! Step frequency up by step size
[D]! Step frequency down by step size
MC145xxx Additional Commands
[E]
Set function of output A
[R]
Set crystal/reference mode – Current mode is Ref. mode, REFout low
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Initialization/System Setup Commands:
[P]
Set output port address – Current address is $278
[G]
Change board definitions
[I]
Initialize board(s), Write all registers
This screen shot is a representative sample of the screens within this program. To access this screen
with the MC145220 Dual EVK selected in the "Define boards to program" screen, press [Q]! . This will
place you in the "Select from the available options" screen you see above.
This sequence to access the "Select from the available options" screen works the same for any selected
board in the "Define boards to program" screen.
MOTOROLA
Freescale Semiconductor, Inc.
Welcome to MC145xxx EVK Demonstration Program, rev 4.0
Select from the available options
Brd [–]!: N/A
60 MHz [W] Change default low freq.
70 MHz [Y] Change default med. freq.
80 MHz [Z] Change default high freq.
[X]! Terminate demonstration program. [?]! View help screen.
For More Information On This Product,
Go to: www.freescale.com
Brd [–]!: N/A
[O] Set PLL output frequency
[F] REFin freq. & channel spacing
[N] Change C register and Prescale
MC145220EVK
21
Advertisement
Table of Contents
