Table of Contents
Advertisement
4.3 Connecting an XAMP (cont.)
6. Connect the female BNC plug of the XAMP to the male BNC transducer head, as shown in Figure 84 below:
7. Wrap the extra length of cable around the perimeter of the junction box such that the BNC heads do not rest on
other cables or on each other (see Figure 85 below).
Model T17 Installation Guide
Figure 84: Female Plug to Male BNC Head
Figure 85: BNC Heads
Chapter 4. Inserting T17 Transducers into the Pipe
71
Advertisement
Table of Contents
