Table of Contents
Advertisement
4.2.2 Mounting the Insertion Mechanism (cont.)
2. Visually inspect the transducer to make sure the top Swagelok
CAUTION!
®
Swagelok
3. Remove the four bolts that fasten the barrel to the packing gland.
®
1.
Swagelok
is a registered trademark of the Swagelok Company.
Model T17 Installation Guide
The stop ring at the end of the barrel is supposed to be loose.
fitting or you could change the transducer alignment.
Top
Swagelok
Fitting
Stop Ring
Figure 68: Check Fitting and Remove Bolts
Chapter 4. Inserting T17 Transducers into the Pipe
®1
fitting is not loose (see Figure 68 below).
Fastening Bolts
tighten the
DO NOT
59
Advertisement
Table of Contents
