NEC Aspila Topaz Programming Manual page 157

IN
SA
SB
Input Data(Cont'd)
Prog. No.
20-14-09 Forced Trunk Disconnect <Not for ISDN T-point>
This option enables or disables a tie trunk caller's ability
to use Forced Trunk Disconnect (Service Code *26). This
option is not available to DISA callers.
20-14-10 Call Forward Setting by Remote Via DISA
20-14-11
DISA/Tie Trunk Barge-In
This option enables or disables a DISA or tie trunk
caller's ability to use the Barge In feature.
Conditions
None
Feature Cross Reference
Class of Service
Telephone Programming Instructions
To enter data for Program 20-14(Class of Service Options for DISA/E&M):
1. Enter the programming mode.
2. Enter 20 14
20-14-01 F-Cls1
Del 1digit Dial 0
3. Enter the number of the item you want to program.
20-14-xx F-Clsxx
xxxxx
4. Select the Class of Service number to be programmed by pressing the FLASH or the VOLUME
VOLUME keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
Program 20: System Option Setup
20-14
: Class of Service Options for DISA/E&M
Item
149
Input Data Default
0
0 : Off
1 : On 0
0
or
Programming Manual
Related
Program