Principle Of Operation - Siemens SIMATIC RTU3041C Manual

1 Introduction
1.2

Principle of Operation

Diagram
The following figure shows the most important components of the solution
schematically:
Figure 1-2
TeleControl Server
Implemented functions
The following functions are implemented in the application example:
•
Receiving a wake-up SMS to wake up the RTU3041C from sleep mode.
•
Sending an email/SMS to a defined recipient when a critical level is exceeded
or not reached.
•
Time synchronization via GPS.
•
Position determination of the RTU3041C via GPS.
•
Sending an SMS to a defined recipient when the RTU3041C moves outside
the defined range.
Monitoring of Remote Measurement Points
Entry ID: 109739240, V3.0,
Control
center
Basic
OPC UA
Ethernet
Router
GPS
signal
RTU3041C
06/2021
OPC UA
Client
Cell phone
6