2 Engineering
Creating tags for programming in the RTU3041C
Before you start programming in the RTU, configure the inputs, outputs, and
memory bits.
1. Navigate to the "Tags" menu.
2. Open the "Digital inputs" tab.
3. Click on input 0.
4. Enable the "Active" checkbox.
5. Assign the name "float".
6. Select that an additional update cycle is also performed in sleep mode when
the value changes.
7. Then click "Apply".
8. Click on input 1.
9. Enable the "Active" checkbox.
10. Assign the name "enableReadFillLevel".
Monitoring of Remote Measurement Points
Entry ID: 109739240,
V3.0,
06/2021
10
11
12
24