Download Print this page
Sealey TP80 Instructions
Sealey TP80 Instructions

Sealey TP80 Instructions

Electric jerry can pump

Advertisement

Quick Links

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/
OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
WARNING! This pump must be used in accordance with Health & Safety, government, local authority, and water authority rules and
regulations.
Familiarise yourself with application and limitations, as well as the potential hazards peculiar to the pump.
Maintain the pump in good condition. Keep the pump clean.
Replace or repair damaged parts (use an authorised service agent). Use genuine parts only. Non authorised parts may be dangerous and will
invalidate the warranty.
DO NOT operate the pump if any parts are damaged or missing as this may cause failure and/or personal injury.
DO NOT use the pump for any purpose other than for which it is designed.
DO NOT operate pump out of liquid. The pump pick up area must be completely submerged during operation.
DO NOT operate the pump during freezing temperatures. DO NOT leave the pump in liquid that may freeze.
DO NOT carry the pump by its electrical cable, or outlet pipe.
When not in use rinse pump, drain out any liquid and store in a frost free, safe location
WARNING! DO NOT allow uncontrolled discharge of contaminated water/harmful chemicals thus polluting the environment.
2. INTRODUCTION & SPECIFICATIONS
Easily transfers fluid from 5, 10 & 20ltr jerry cans. Compatible for use with petrol, diesel, kerosene and water. Hook storage design allows pump to
attach onto jerry can and features a height adjustable control to accommodate different sized containers. Fitted with auto-stop feature to prevent
overfilling. Operated by an electric motor powered by 2 x AA batteries (not included).
Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TP80
Hose Length: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .700mm
Flow Rate: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9ltr/min
Batteries: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 x AA (not included)
© Jack Sealey Limited
InSTRucTIonS FoR:
ELECTRIC JERRY CAN PUMP
TP80
MoDEL no:
Original Language Version
TP80 Issue:1 14/03/14

Advertisement

loading

Summary of Contents for Sealey TP80

  • Page 1 TP80 MoDEL no: Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
  • Page 2 Remove the batteries as in section 3. Dispose of battery according to local government guidelines. Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme.