thank you for purchasing a Sealey product. manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instructions
1. Safety
WarnInG! This pump must be used in accordance with Health & Safety, government, local authority, and water authority rules and
regulations.
Familiarise yourself with application and limitations, as well as the potential hazards peculiar to the pump.
9
Maintain the pump in good condition. Keep the pump clean.
9
Replace or repair damaged parts (use an authorised service agent). Use genuine parts only. Non authorised parts may be dangerous
9
and will invalidate the warranty.
only to be used in a well ventilated area where there is no chance of sparks or flames.
9
do not use with petrol and kerosene.
8
do not operate the pump if any parts are damaged or missing as this may cause failure and/or personal injury.
8
do not use the pump for any purpose other than for which it is designed.
8
do not operate pump out of liquid. The pump pick up area must be completely submerged during operation.
8
do not operate the pump during freezing temperatures. do not leave the pump in liquid that may freeze.
8
do not carry the pump by its outlet pipe.
8
When not in use rinse pump, drain out any liquid and store in a frost free, safe location.
9
WarnInG! do not allow uncontrolled discharge of contaminated water/harmful chemicals thus polluting the environment.
2. IntroductIon
easily transfers fluid from 5, 10 & 20L jerry cans. Compatible for use with diesel and water. Hook storage design allows pump to attach onto
jerry can and features a height adjustable control to accommodate different sized containers. Fitted with auto-stop feature to prevent overfilling.
Operated by an electric motor powered by 2 x AA batteries (not included). Not suitable for use with petrol and kerosene.
3. SpecIfIcatIon
model no: ..................................................................... tp80
Hose length: .............................................................. 700mm
Flow Rate: .................................................................. 9ltr/min
Battery: ................................................. 2 x AA (not included)
4. battery fIttInG
4.1.
Slide battery compartment open as in fig.1.
4.2.
Insert 2 x AA batteries as in fig.2, observing the correct polarity.
4.3.
Replace sliding cover.
4.4.
Removal of the batteries is the reverse of 4.1 to 4.3.
fig.1
© Jack Sealey limited
jerry can pump battery operated
tp80
Model no:
fig.2
Original Language Version
TP80 Issue 5 (1,2,5) 18/11/19