4.7 CUC data transfer
In "Panel/PQ" service mode
1.
"WB/Mura/CUC data transfer"
a.
Go to
"WB/Mura/CUC data
b.
To select
To change data , press "←" or "→" on remote commander.
c.
category by "↑" or "↓".
transfer", press → button.
2. In "WB/Mura/CUC data transfer"
a. Select
"CUC data
commander .
b. To change the items, press "←" or "→" on remote commander and
press "Enter" button.
Choose
1. T-con to SoC
and press "Enter" button.
c. "Mura data transfer" is also displayed on the menu, but Mura
function does not work on CS model. Please skip this item by
pressing "↓" on remote commander .
d. Select "[start]" and press "Enter" button to start transfer.
Please apply BM3 board or panel is replaced.
transfer" by pressing "↑" or "↓" on remote
82
SYS SET