Wb Data Transfer - Sony KD-55A9F Service Manual

4.6 WB data transfer

In "Panel/PQ" service mode
1.
"WB/Mura/CUC data transfer"
a. Go to
"WB/Mura/CUC data
b. To select
To change data , press "←" or "→" on remote commander.
c.
category by "↑" or "↓".
transfer", press → button.
2. In "WB/Mura/CUC data transfer"
a. Select
commander .
b. To change the items, press "←" or "→" on remote commander and
press "Enter" button.
Selectable items are:
 0. SoC to T-con
 1. T-con to SoC
 2. No action
c. "Mura data transfer" is also displayed on the menu, but Mura function
does not work on
CUC function can work. (refer to next page).
Please skip these items by pressing "↓" on remote
commander .
d. Select "[start]" and press "Enter" button to start transfer.
Please apply BM3 board or panel is replaced.
"WB/Gamma data transfer" by pressing "↑" or "↓" on remote
CS model.
81
SYS SET