Intercom and telephone
11.9 Calling an entry in the call list
The call list stores the numbers that have been
dialled and the numbers of received calls.
Note:
A maximum of 60 items are stored in
the call list.
f In the phone menu, tap the Calls tab, if nec-
essary.
f Tap the desired number.
The number is called.
11.9.1 Tone dial feature (DTMF)
During a current call, you can generate DTMF
tones:
f Tap
.
f Enter a number.
11.10 Second call
You can manage two calls simultaneously if you
answer another call during your current call.
11.10.1 A second incoming call
If you receive a second call during your current
call, the following notification appears:
Second incoming call
Caller 2
f Tap
to answer the second call.
Notes:
To reject the second call, tap
f
If you answer the second call, your
f
current call is automatically inter-
rupted and the connection put on
hold.
11.10.2 Switching between two
calls
If there are two simultaneous calls, the following
display appears:
Multiple call
Caller 1
Caller 2
To switch between the two calls,
f tap
.
To end the currently active call,
f tap
.
The call that is on hold will be activated auto-
matically.
Note:
Even if the person you are calling ends
.
the active call, the call that is on hold
will be activated automatically.
11.11 SMS text messages
11.11.1 Reading an incoming text
message
Note:
You can enable or disable the display-
ing of incoming text messages. For
further details on this, please read the
following section.
en | 67
2:35 active
6:23 on hold