LG niagara4 MultiSITE Edge 10 User Manual page 70

Daisy Chain link mode
The following example shows the system shell network settings for the daisy chain mode. This is the default network mode
for the device.
Note:
If set up for Daisy Chain Mode, you cannot configure the secondary adapter, as shown below.
Figure 42: Example: System shell with network settings for Daisy Chain Mode
Update System Time
If the commissioning process hasn't been completed yet, it is often important to set the current date and time
(YYYYMMDDHHMM.ss). For example: 201510231536 for 23-Oct-2015 at 3:36pm UTC or 11:36 EDT.
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
MS- E10 User Guide
70